什么是彈簧阻尼減振器裝置？

發布時間：2019-03-04 10:24

什么是彈簧阻尼減振器裝置？
What is a spring - damped shock absorber device?

什么是彈簧阻尼<a href='http://www.dikeurh.cn' target='_blank'><u>減振器</u></a>裝置？

答：在彈簧阻尼減振器前，請明確承認阻尼器的模型尺寸和尺寸是否準確。減振器的收縮在10-25mm。減震器放在準確的位置，需求拆卸固定螺釘，之后固定固定裝置，在減震器內固定。阻尼器用根螺釘固定。阻尼器的高度必須調整到設備的高度。調整螺釘帽順時針方向，逆時針方向向下，調整后的程度，之后接收道路。彈簧阻尼、性：閥體材質分為平常的鑄鐵和球墨鑄鐵球墨鑄鐵閥體，經鍍鋅加工，耐候性好。特殊結構預設，可根據需求調整高度練習。外置式重量輕，聯系緊密不容易用壞，便于安裝在各種機械上。彈簧按熱處置、防銹、烤漆等順著次序排列。20mm、40mm的荷載-變型程度可以用來消除對機械結構的振蕩。底部防滑橡膠，方便安全，便于控制和調節，可有效消除地板震動，價格也較便宜。高阻尼阻尼彈簧減振用具有低頻和彈簧減振器聯系兩者的有點，消除了彈簧減振器的共振波幅波動現象，解決了橡膠減振器本來就有頻率高的問題，是一種理想的主動隔振和不主動隔振產品。
Answer: before the spring damper, please explicitly acknowledge the model size and size of the damper is accurate.The shock absorber has a contraction of 10-25mm.The shock absorber is placed in the correct position. It is necessary to remove the fixing screw and then fix the fixing device in the shock absorber.The damper is fixed with a screw.The height of the damper must be adjusted to the height of the equipment.Adjust the screw cap clockwise and counterclockwise downward to adjust the degree after receiving the road.Spring damping, sex: valve body material is divided into ordinary cast iron and nodular cast iron nodular cast iron valve body, galvanized processing, weather resistance is good.Special structure preset, height can be adjusted according to the needs of practice.External type light weight, tight connection is not easy to use bad, easy to install in a variety of machinery.The springs are arranged in order of heat treatment, rust prevention, baking varnish, etc.The load - variation degree of 20mm and 40mm can be used to eliminate the vibration of the mechanical structure.The bottom anti-skid rubber, convenient and safe, easy to control and adjust, can effectively eliminate the floor vibration, the price is cheaper.High damping damping spring is an ideal product for active vibration isolation and non-active vibration isolation, which has the advantages of low frequency and spring shock absorber, eliminates the resonance amplitude fluctuation of spring shock absorber, and solves the problem of high frequency of rubber shock absorber.